View BAT54H_1217383.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BAT54H
Schottky barrier single diode in small SOD123F package
Rev. 01 -- 7 April 2005 Product data sheet
1. Product profile
1.1 General description
Planar Schottky barrier single diode with an integrated guard ring for stress protection, encapsulated in a SOD123F small and flat lead SMD plastic package.
1.2 Features
s s s s Low forward voltage Small and flat lead SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior
1.3 Applications
s s s s Ultra high-speed switching Voltage clamping Line termination Inverse-polarity protection
1.4 Quick reference data
Table 1: Symbol IF VR VF
[1]
Quick reference data Parameter forward current reverse voltage forward voltage IF = 10 mA
[1]
Conditions
Min -
Typ -
Max 200 30 400
Unit mA V mV
Pulse test: tp 300 s; 0.02.
2. Pinning information
Table 2: Pin 1 2 Pinning Description cathode anode
[1]
Simplified outline
Symbol
1 2
sym001
1
2
[1]
The marking bar indicates the cathode.
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
3. Ordering information
Table 3: Ordering information Package Name BAT54H Description plastic surface mounted package; 2 leads Version SOD123F Type number
4. Marking
Table 4: BAT54H Marking codes Marking code AG Type number
5. Limiting values
Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VR IF IFRM IFSM Ptot Tj Tamb Tstg
[1]
Parameter reverse voltage forward current repetitive peak forward current non-repetitive peak forward current total power dissipation junction temperature ambient temperature storage temperature
Conditions
Min -
Max 30 200 300 600 375 125 +125 +150
Unit V mA mA mA mW C C C
tp 1 s; 0.5 tp 10 ms Tamb 25 C
[1]
-65 -65
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
6. Thermal characteristics
Table 6: Symbol Rth(j-a) Rth(j-sp)
[1] [2] [3]
Thermal characteristics Parameter Conditions
[1] [2]
Min -
Typ -
Max 330 70
Unit K/W K/W
thermal resistance from junction to in free air ambient thermal resistance from junction to solder point
[3]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. Soldering point of cathode tab.
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
2 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
7. Characteristics
Table 7: Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter forward voltage Conditions IF = 0.1 mA IF = 1 mA IF = 10 mA IF = 30 mA IF = 100 mA IR Cd
[1]
[1] [1] [1] [1] [1]
Min -
Typ -
Max 240 320 400 500 800 2 10
Unit mV mV mV mV mV A pF
reverse current diode capacitance
Pulse test: tp 300 s; 0.02.
VR = 25 V VR = 1 V; f = 1 MHz
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
3 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
103 IF (mA) 102
(1) (2) (3)
msa892
103 IR (A) 102
(2) (1)
msa893
10
10
1
(1)
(2) (3)
1
(3)
10-1
0
0.4
0.8
VF (V)
1.2
10-1 0
10
20
VR (V)
30
(1) Tamb = 125 C (2) Tamb = 85 C (3) Tamb = 25 C
(1) Tamb = 125 C (2) Tamb = 85 C (3) Tamb = 25 C
Fig 1. Forward current as a function of forward voltage; typical values
Fig 2. Reverse current as a function of reverse voltage; typical values
msa891
15 Cd (pF)
10
5
0
0
10
20
VR (V)
30
Tamb = 25 C; f = 1 MHz
Fig 3. Diode capacitance as a function of reverse voltage; typical values
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
4 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
8. Package outline
1.7 1.5 1 0.55 0.35 3.6 3.4 2.7 2.5 1.2 1.0
2 0.70 0.55 Dimensions in mm 0.25 0.10 04-11-29
Fig 4. Package outline SOD123F
9. Packing information
Table 8: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package BAT54H
[1]
Description 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 10000 -135 -115
SOD123F
For further information and the availability of packing methods, see Section 15.
10. Soldering
4.4 4 2.9 1.6 solder lands solder resist 2.1 1.6 1.1 1.2 solder paste occupied area 1.1 (2x)
Reflow soldering is the only recommended soldering method. Dimensions in mm
Fig 5. Reflow soldering footprint SOD123F
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
5 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
11. Revision history
Table 9: BAT54H_1 Revision history Release date 20050407 Data sheet status Product data sheet Change notice Doc. number 9397 750 14919 Supersedes Document ID
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
6 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
12. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
13. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
14. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
15. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 14919
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 7 April 2005
7 of 8
Philips Semiconductors
BAT54H
Schottky barrier single diode in SOD123F package
16. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 2 2 3 5 5 5 6 7 7 7 7
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 7 April 2005 Document number: 9397 750 14919
Published in The Netherlands

▲Up To Search▲

Price & Availability of BAT54H

	To Download BAT54H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .